Top Ranked Tips For Concrete Polishing
One of the industries that have undergone great evolution is the polishing industry. Many grinding companies have been developed and other many created. With time, many other companies will keep coming up due to large population getting interested in this industry. These companies can apply the ideas in this article to ensure that quality concrete polishing is done. Below are the tips that can be applied in concrete polishing.
Determining the surface hardness is the first thing that should be done. This is done by testing its hardness using a concrete hardness tester. This is to help in deciding on the right abrasives. The surface then is scratched with the use of the tip number nine. Then, in a descending order, the scratching is done. This is done until the tip cannot do the scratching anymore. At this level, the hardness is ok now.
Then the next thing is preparing the concrete surface. One can find coated floors for concrete polishing. Here, the coat is removed with the right equipment. This depend on the type of coating. Some floors normally have cracks and holes. These holes and cracks should be repaired first. Then gritting is done with the metal bond tooling to a level and flatness that is appropriate.
The next thing is the removal of tool marks. Transitional tooling can help here. The marks made by the tool can be removed very well with the use of transitional tooling. The process is considered successful when all the tool marks disappear.
Then the floor is densified and hardened by vacuuming it. The appropriate tool for densifying and solidifying the surface of the floor is the pore and crack filler. It helps avoid water penetration that can result in stains that can result due to water penetration. A lot of care is needed so as the pooling does not result when using the floor densifiers. Pooling creates stains that can harden the process of polishing.
Then concrete polishing is done. Resign band tooling is appropriate to start with. Then dust removal is done between the passes. After the final grit level is reached, burnishing is done with the use of a burnishing pad.
Then the last thing that should be done to the floor is protecting it. The protection is done by sealing the floor. Some of the things that the floor is protected from are the grease, oil and any other chemicals. The floor sealer is bet applied with the use of the pump. The floor can be left shining after burnishing is done. Successful concrete polishing can be done with the tips given.